News Archives - Page 3 of 8 - Elgood Industrial Flooring Ltd

Industrial Floor Coating for CHEP – Warehouse Flooring Case Study, Manchester and Dublin

Introduction CHEP required hard-wearing industrial floor coatings for two busy warehouse facilities in Manchester and Dublin, covering 2,000 m² and 2,500 m² respectively. Both heavily worn concrete floors needed to be refurbished to improve presentation, support better housekeeping and withstand continual fork lift traffic. Elgood Industrial Flooring was appointed to prepare the existing concrete and […]

Industrial Floor Coating for Hyundai UK – Warehouse Flooring Case Study, Tilbury Docks

Introduction Hyundai UK required a high-performance industrial floor coating for a new 2,200 m² warehouse and distribution facility at Tilbury Docks. The floor needed to provide a hard-wearing, easy-to-clean surface capable of withstanding daily warehouse operations while also helping to organise the space visually around racking, storage and dispatch. Elgood Industrial Flooring was appointed to […]

Industrial Floor Coating for Hartridge – Epoxy Flooring Case Study, Buckingham

Introduction Hartridge required a high-performance industrial floor coating for its newly built facility in Buckingham. The project covered 2,000 m² of new power floated concrete and formed the first stage of the fit-out programme, so the floor needed to deliver both durability and a strong visual impression from the outset. Elgood Industrial Flooring was appointed […]

Anti Static Industrial Floor for Kittiwake – ESD Flooring Case Study, Littlehampton

Introduction Kittiwake required a specialist anti static industrial floor for an ESD area at its Littlehampton facility, where the protection of electronic devices was critical. The existing concrete floor had already been diamond ground and coated, but the revised requirements for static control meant a new system was needed to meet strict ESD criteria. Elgood […]

Industrial Floor Coating for Diperk – Epoxy Flooring Case Study, Peterborough

Introduction Diperk needed a hard-wearing industrial floor coating for its Peterborough facility, where Perkins diesel engines are refurbished and serviced. The existing concrete floor had been heavily shot-blasted in the past and carried a roller-applied epoxy coating that varied in thickness, leaving the surface uneven and less suitable for a smart, efficient servicing environment. Following […]

Industrial Floor Coating for Severn Engineering – Epoxy Flooring Case Study, Worcestershire

Introduction Severn Engineering required a high-performance industrial floor coating for a new 1,000 m² unit in Worcestershire as part of its move from two smaller premises into one larger facility. The business wanted a floor that would help create the right image for its refurbished laser cutting machine operation while also standing up to manufacturing […]

Industrial Floor Coating for Arnold Wragg – Epoxy Flooring Case Study, Sheffield

Introduction Arnold Wragg required a high-performance industrial floor coating for a new 1,300 m² power floated concrete floor at their Sheffield facility. The business needed a hard wearing surface capable of coping with manufacturing use and regular fork lift traffic, while also delivering a good standard of appearance and a sealed finish that would be […]

Industrial Flooring for Hangar at Oriens Aviation – Epoxy Flooring Case Study, Biggin Hill, Kent

Introduction Oriens Aviation needed to refurbish the floor in its Biggin Hill hangar in Kent following the award of a new contract with a demanding opening deadline. The existing 1,300 m² concrete floor had been coated previously but was worn, untidy and affected by open joints and local defects that were hindering the movement of […]

Industrial Floor Refresh for Technicut – Epoxy Flooring Case Study, Sheffield

Introduction Technicut, a precision engineering company in Sheffield, needed to refresh the floor in two adjoining production units ahead of installing new machinery. The concrete slab had been coated by Elgood Industrial Flooring more than nine years earlier and was still well bonded, but the surface required an upgrade to meet current presentation and performance […]