Sealing a newly laid floor is an important step in ensuring the durability and long-term resistance of your floor. Effective sealing helps to create a dust-proof surface that is easier to clean and protects it from damage.
Our industrial flooring seal is a solvent-free Epoxy coating with very little colour. It is designed to keep your floors looking and feeling fresh for longer.
Seals are typically used in projects where the final floor layout or use of a building has not been determined and/or where a dust-free and easy-to-clean surface is required. The seal coat can be cleaned routinely with a scrubber dryer.
Benefits
- Enhanced Durability – Penetrating sealers lock into the substrate, reducing dusting and surface wear.
- Moisture Resistance – Creates an impermeable barrier against water, oil and chemical ingress.
- Improved Cleanability – Smooth, low-porosity finish simplifies sweeping and wash-down.
- Cost-Effective Refurbishment – Extends floor life and delays the need for full recoating or replacement.
- Maintains Natural Look – Clear seal retains concrete’s original character and colour tone.
Technical Specs
- Sealer Type: Silane/siloxane or epoxy-modified penetrants
- Penetration Depth: Up to 10 mm into concrete pores
- Coverage Rate: 5–10 m²/L per coat (depending on porosity)
- Drying Time: Touch-dry in 2–4 hours; full cure in 24 hours
- VOC Content: <50 g/L
- Temperature Range: +5 °C to +35 °C during application
- Slip Resistance: Maintains original concrete texture; can be enhanced with aggregate
Applications
- Concrete warehouse and storage floors
- Manufacturing plant throughput areas
- Vehicle parking decks and ramps
- Industrial workshops and garages
- Food and beverage processing zones
- Cold storage and freezer facilities
FAQs
Typically every 2–5 years, depending on traffic levels and chemical exposure.
Yes—provided the surface is clean and sound; we’ll mechanically prepare it to ensure adhesion.
Light foot traffic after 4 hours; full vehicle use after 24 hours.
It gives a subtle “wet look” sheen without significantly altering the concrete’s natural color.
