Our Epoxy Coatings are our most popular industrial flooring product – and for good reason. Epoxy Industrial Floor Coatings are a cost-effective way to lift the presentation of any setting and environment – just ask our clients!
At Elgood Industrial Flooring, we use only the highest quality solvent-free Epoxy resin and curing agents.
Our Epoxy coatings range from a straightforward clear seal, two-coat applications of 500 microns, multi-layer 750 microns to 1mm coatings, to self-smoothing 1.5 mm to 4mm systems.
The sealed surface provides a floor which can be routinely cleaned with scrubber dryers. What’s more, with the correct preparation. floor Layouts can be designed and altered at a later date without the need to remove the underlying coating. This reduces costs and keeps waste to a minimum.
All of our coatings are applied by trowel. This is sometimes referred to as a ‘scratch trowel technique’.
This method of application has a few advantages:
- It results in an even distribution of resin;
- Minor defects are filled resulting in an even-wearing surface with fewer pockets where dirt could become trapped;
- It yields a more consistent finish;
- It’s better value.
All of the Epoxy Coatings mentioned above are available in a range of finishes to meet the requirements of different working environments.
Benefits
- High Chemical & Impact Resistance – Epoxy coatings protect against acids, solvents, heavy traffic and dropped tools.
- Seamless & Hygienic – Monolithic finish eliminates joints, preventing bacteria build-up and simplifying cleaning.
- Excellent Adhesion – Bonds strongly to concrete, preventing delamination and minimising maintenance.
- Load-Bearing Performance – Engineered to withstand forklifts, pallet trucks and heavy machinery without cracking.
- Fast Cure Options – Select rapid-setting formulations to reduce downtime and get you back in service quickly.
Technical Specs
- Resin Type: Two-part epoxy
- Thickness: 1 mm – 3 mm typical build
- Compressive Strength: ≥ 55 N/mm²
- Tensile Strength: ≥ 12 N/mm²
- Flexural Strength: ≥ 25 N/mm²
- Slip Resistance: R9–R11 per DIN 51130
- Thermal Resistance: –10 °C to +50 °C
- Gloss Level: Satin or high-gloss
Applications
- Warehouses & distribution centres
- Manufacturing and assembly plants
- Automotive workshops and showrooms
- Cold storage facilities
- Food and beverage processing areas
- Loading bays and logistic hubs
FAQs
Standard epoxy cures for light traffic in 24 hours; full mechanical and chemical resistance in 5 days.
Only if the existing coating is sound. We’ll diamond-grind to ensure proper adhesion.
Yes—epoxy can be pigmented or dressed with decorative quartz or flakes for aesthetic and slip resistance.
Routine cleaning with a neutral pH cleaner and periodic inspection for wear areas.
